HITACHI 9102727 EX200-5 Slewing bearing

Static Load Rating:8138 lbf; Center of Bearing from Bearing End Y:36.5 mm; Total Height L:195.00 mm; Shaft Size d:2.125 in; Bolt Hole Spacing J1:113.10 mm; Flange Width A1:36.00 mm; Dimension B1:2.441 in; Bolt Circle Diameter J:160.00 mm; Bolt Hole Size N:19.00 mm; Pilot Width A3:12.00 mm;

Cr:1040000 N; Dm:210 mm; Brand:FAG; m1:7,18 kg / Weight, ad; Size (mm):160x280x74; Ba min:8 mm; da max:201 mm; nB:1790 1/min / Referen; db min:189 mm; c:30 mm;

Characteristic outer ring frequency, BPF0:16.08 Hz; Size (mm):70x85x25; Da max.:81 mm; Outer Diameter (mm):85; Min operating temperature, Tmin:-20 °C; Da max:81 mm; Inventory:0.0; Characteristic inner ring frequency, BPFI:17.92 Hz; Precision class:P0; Brand:NTN;

d:12 mm; Angle:7 °; r min.:0,5 mm; C:9 mm; Bearing number:GE12XS/K; Width (mm):11; Basic dynamic load rating (C):13 kN; Brand:LS; dk:18 mm; Outer Diameter (mm):22;

Bearing number:32064-X; D:480 mm; Da min:424 mm; r1 min.:5 mm; Limiting speed:1100 r/min; C:74 mm; Brand:NKE; Bore Diameter (mm):320; Outer Diameter (mm):480; Calculation factor (Y):1,31;

B:30 mm; (Refer.)Mass(kg):2.52; d:90 mm; db(min):99; r(min):2; Db(min):-; d1:-; dd(min):-; rb(max):2; Bearing No.:NUP218R;

Basic dynamic load rating (C):20,6 kN; a:14,7 mm; D2:63 mm; (Grease) Lubrication Speed:21 000 r/min; D1:62 mm; Outer Diameter (mm):68; Bearing number:7008CTRSU; B:15 mm; r min.:1 mm; Basic static load rating (C0):15,9 kN;

Basic static load rating (C0):3,68 kN; B:11 mm; Weight:0,045 Kg; C:11 mm; d:15 mm; Width (mm):11; Outer Diameter (mm):35; Brand:ISB; (Grease) Lubrication Speed:21420 r/min; Size (mm):15x35x11;

(Grease) Lubrication Speed:4200 r/min; Outer Diameter (mm):180; Limiting Speed - Oil:5,800 rpm; Angle (α):15 °; Static Load Rating:223,000 N; da min.:128 mm; C:28 mm; Da1 (max):172 mm; Bore Diameter (mm):120; Outside Diameter:180 mm;

Cg - Geometry Factor11:0.107; Cone Part Number:855; C1 - Cup Flange Width:0.3750 in; C - Cup Width:1.7500 in; D:7.5 in; G1 - Heat Generation Factor (Roller-Raceway)10:264; R - Cone Backface To Clear Radius1:0.310 in; db - Cone Backface Backing Diameter:4.65 in; a - Effective Center Location3:-0.6 in

d:35 mm; Outer Diameter (mm):66; B:32 mm; C:32 mm; Bearing number:445980A; Size (mm):35x66x32; Width (mm):32; Bore Diameter (mm):35; D:66 mm; Brand:SKF;

G:114,3 mm; I:55,4 mm; K:66 mm; Brand:ILJIN; d:30 mm; Bearing number:IJ142005; F:151,69 mm; E:64,067 mm; M:64,08 mm; L:57,86 mm;

d1:93 mm; Min operating temperature, Tmin:-40 °C; r1a max:3.3 mm; Max operating temperature, Tmax:120 °C; rs min:3.5 mm; Size (mm):69.85x123.825x30.162; ra max:3.5 mm; Brand:NTN; Characteristic inner ring frequency, BPFI:11.75 Hz; D:123,825 mm;

r3,4 - min.:0.6 mm; Static Axial rigidity:1400 N/micron; Preload:4700 N; Da - max.:100 mm; Mass bearing:4.3 kg; ra - max.:0.6 mm; D1:100 mm; J:120 mm; H:45 mm; Limiting speed:2600 r/min;

d:20 mm; SW:3 mm; L1:225 mm; H2:41 mm; Weight:1,7 Kg; T max.:100 °C; C:12.8 kN; Designation of bearing:ES204G2; A5:13.9 mm; Recommended tightening torque for set screw:5.5 Nm;